Rockers / Lower Doors PPF | Rivian R2, Clear Paint Protection Film
Protect the lower painted panels of your Rivian R2 from rock chips and scratches with precut clear paint protection film. Six pieces cover the lower fender and door areas on both sides, following the body contours while keeping the original paint visible. Choose 8 mil or 10 mil clear gloss film, with installation essentials included.
Pairs well with
Product Features
🛡️ Protection for the lower panels
The lower doors sit in the path of debris thrown up by the wheels. Clear PPF adds a protective layer to help reduce rock chips, scuffs and scratches on paved roads and dirt-road drives.
🧩 Six pieces, shaped for R2
Three precut pieces per side follow the lower painted fender, front door and rear door areas. The vehicle-specific pattern keeps each section manageable, with no measuring or trimming on the vehicle.
💎 Clear film. Original finish.
Optically clear, gloss TPU film keeps your paint visible beneath a discreet protective layer. Coverage follows the lower painted panels above the black trim.
📏 Two film thicknesses
Choose 8 mil or thicker 10 mil PPF with the same precut coverage and clear gloss finish. Both feature a water-repellent coating and a self-healing surface that uses heat to help reduce fine surface marks.
🛠️ Designed for a DIY install
Use slip solution to position each piece, then squeegee out the water and check the edges. Follow the installation video for alignment and finishing techniques. Plan about 60 minutes for both sides and allow two days for the film to cure.
📦 Installation essentials included
The kit includes six PPF pieces in your selected thickness, a 2 oz slip-solution spray bottle and a 2 × 2 inch rubber squeegee. Add water to the bottle before you begin.
More Info / Specifications
Rockers / Lower Doors PPF | Rivian R2, Clear Paint Protection Film
Included in the Kit
Materials
Install Time & Difficulty
Fits Models
How to install
FAQs
How long does PPF last?
Paint protection film, if installed properly on a clean surface will last anywhere between 5 to 10 years.
Can I install PPF over ceramic coating or wax?
No, you shouldn't. These chemical treatments will prevent the paint protection film from properly adhering to the paint. If your vehicle is ceramic coated or waxed, do not attempt PPF installation.
Can I use car wash if I have PPF?
Yes, please allow 2-3 days after PPF installation before using a car wash though. This allows the paint protection film to fully cure. Also, please consider using touchless car washes, to avoid the risk of edges picking up by scrubbing the car with a towel.
Can I install PPF in the winter?
Yes! You may need a heat gun or a hair dryer though, as paint protection film gets stiff and unsticky in cold weather. If the surface you are installing on is curvy, use a heat gun or a hair dryer to warm up the film - this will make it soft and sticky. When doing that, remember to spray the PPF on top with soapy solution, to avoid the squeegee dragging against it. Also, if any edges are lifting up at all, heat them up and push them with your fingers to properly seal them.