Fast & free US mainland shipping $50+ / 30 days returns

Product Features

⚡️ Reliable charging

Enjoy fast and efficient charging for your iPhone or Android with a compatible MagSafe case!

🔋 Clutter free

With charging power of up to 6.5W (limited by the USB-A port's power) per phone, our charger eliminates the need for additional cables or adapters.

🧲 MagSafe compatibility

With strong built-in magnets and a design that accommodates the iPhone's camera bump, the TWRAPS charger keeps your device securely in place while wirelessly charging, even on bumpy roads.

💠 Solid and beautiful design

Our wireless charger boasts a sleek two layer construction, blending seamlessly with your car's interior.

🇺🇸 Made in the USA

From design to manufacturing our charger is entirely made in the USA.

🏆 1 year warranty

Worry free 1 year warranty - if the charger stops working for any reason, we'll replace it for free.

FCC Certified

Our chargers have been independently tested by a 3rd party laboratory and FCC approved as compliant with all US regulatory requirements.

See on FCC's website

Built for Safety

Overheat Protection

Should the charger exceed safe temperatures, it will shut off on its own.

Fake Object Detection

Whenever a non wireless charging compatible object is placed over our charger, it will automatically detect it and refrain from charging.

Battery Protection

Our charging firmware supports fast charging (PD protocol) at various voltage levels, dynamically switching to provide the precise power your battery requires.

Short Circuit Protection

Should a short circuit occur, the charger will automatically switch off.

More Info / Specifications

MagSafe Compatible Dual Wireless Charger | 2017-2020 Tesla Model 3/Y

Fits Models

  • 2017-2020 Tesla Model 3 and Model Y (Gen1 console)

Materials

  • The main body is constructed from two 6mm thick high-density acrylic sheets, each featuring a satin, fingerprint-resistant coating on both sides.
  • Our pucks are built with strong N52 magnetic arrays.

Included in the Kit

  • MagSafe compatible dual wireless charger
  • 2 x USB-C to USB-A adapters

How to install

FAQ & Troubleshooting

Does it work with iPhone?

Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back. Our charger is designed on 2 levels so that it can accommodate the iPhone's camera bump.

Does it work with Android?

Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back.

How fast does it charge?

Each puck supports 15W of peak power. Our dual pucks support 20W combined. Notice that charging speed in most cases will be slower due to various restrictions outside of our control - such as how powerful your USB port is, what's your battery health etc. Additionally it's worth noting that iOS throttles non-Apple pucks to 10W.

Will this drain my car's battery?

No! Our pucks are inactive until you place a phone over them.

What kind of case does this work with?

MagSafe case! That's the kind of case that has a magnetic ring on the back - these cases are widely available for most modern phones. Please notice that rugged cases may not be compatible with wireless charging and may not work.

My phone is not staying in place...

If your phone is not staying in place, it means you are not using a MagSafe case. Our pucks utilize a N52 magnetic array which will hold it in place if you have a MagSafe compatible phone case (with a magnetic ring on the back). Please consider getting a new case or at least a stick-on magnetic ring.

Charging is slow...

Our pucks are capable of fast charging. With that said, there are several constraining factors outside of our control. Here are a few to keep in mind:

  • Wireless charging is slower than charging with a cord
  • If your car uses a USB-A port, that will max out at around 6.5W, it's a restriction with the USB-A standard.
  • iPhones will throttle non-Apple chargers to 10W.
  • Your phone may not be allowing faster charging due to full battery or other battery related optimizations or battery health issues.
  • If you are not using a MagSafe case, your phone will almost never be properly positioned. That will result in overheating and loss of charging potential in the form of heat. Please use a MagSafe case.
My phone is getting hot...

If your phone is getting excessively hot (to a point where you can consider it overheating) it may be due to not using a MagSafe compatible case. This will result in the phone not being properly positioned over the charging coils and the energy that's supposed to go in your phone is being dissipated as heat.

With that said, if you believe this is not the case, please contact us for further investigation.

Customer Reviews

Based on 23 reviews
74%
(17)
22%
(5)
0%
(0)
4%
(1)
0%
(0)
B
Bart S. (Manhattan Beach, CA, US)
Works with iphone 16 Pro Max (even in case)

Works great. Magnets are strong. I have 2 cases and it works with both : ESR Classic Hybrid Case (HaloLock) + Otterbox Defender Pro.

Note for the Otterbox, you need to have the front console lid opened to get it on the pad - you can close again after if you like, but you wont get it on the pad with that closed.

(The pictures show the 3mm gap above the top of the iphone)

D
Donald H.E.I.

I have an iPhone 15 Pro Max and needed a charging pad option for my ‘20 Model 3 Performance because I bought it used and it didn’t come with one. This was everything I needed, I also appreciate the cord adapters for USB/C since my center console has one of each. 10/10

R
RYAN J.

Recently bought an iPhone 15 Pro and discovered it no longer charged using the oem wireless charging pad.I came across this product and even though it was more than I wanted to spend, it seemed like the exact solution I was looking for.THE GOODIt works. It charges my phone.THE BADThe fitment is not very good. The oem pad has tabs with a rounded bottom. This pad had neither so there’s this large gap at the bottom. Additionally, it uses adhesive to keep it down as opposed to just replicating the tabs from the oem charging pad.SUMMARYThis thing isn’t cheap, but it does work. I just wish the fitment was better.

M
Michael G.

This charger has a great fit and it does work. But it’s slow and it is essentially a 3D printed part. You can open with a Torx screwdriver and replace with official MagSafe charging pucks. I ran those to a dual 20W charger in the armrest, and it charged MUCH faster

M
Mark H. (Leeds, ENG, GB)
Fantastic Product!

I had imagined the product needed to solve my problem and you had already made it. Thank you!!!

D
Derek W.

This product does as it says. Good build quality and doesn't block the upward tilt of the console too much either, like some other 3rd party charger replacements.However keep in mind each magsafe charger requires 1 USB, and if you're using a USB drive for Sentry mode on a Model [****] then you will not be able to use both chargers

G
George R.

Easy install works great.

M
Matt

Would have like it to fit closer to OEM rather than needing double side tape squares.

M
MrPinrel

I tried several options to get my new iPhone 15 ProMax to charge wirelessly on my 2018 Model 3and this was the best one. The “notch” design at the top makes it easier for the phone to latch to the magnet (as long as you have a magsafe case). Charging speed, however, was restricted since my car only has 2 USB A ports. I fixed this by running some extra power from the cigarette lighter to the front armrest area. Search for “teslatino how to use the 12v model 3 outlet” video for instructions on how to do this.

T
Trent

It’s cool