Headlights & Fog Lights Smoke Tint PPF | 2017-2023 Tesla Model 3 / Model Y

Good product with good instructions. I didn't want too dark so this is the lightest tint. Only difficulty was wrapping around the curves of the head light

I had previously installed this PPF film on my 2018 Model 3, and purchased another set for my 2023 Model 3 Performance. Film is quite simple to install with patience and TWRAPS has great customer service. The Medium Smoke (50% VLT) looks so clean on my car and I always get compliments about it. Would highly recommend to anyone interested in protecting the expensive headlights from rock chips, etc and enhance the look as well!

Quality thick film that looks amazing but was not very easy to install. Ended up having to take it to a local shop to install.

This took a lot of patience. It is all about finding the perfect equilibrium between being lubricated and dry. I originally ordered the light smoke and it was not much different from the stock headlights of my 2023 model 3 performance. I messed up the first time as well, and emailed the company. They responded extremely fast and were extremely helpful. They even sent me the medium smoke for no charge! They gave me more detailed instructions and told me to practice with the light smoke that I still had while I waited for the medium smoke to arrive. The tint comes with a spray bottle that has some soapy chemical in it, and you add water to it. My advice is to get a second spray bottle and fill it with distilled water, so you can adjust the level of soap/water on the go. Also, I ended up using a heat gun to warm up the tint for about 30 seconds before applying. This helped A TON!!!!!!!!!! Take your time, be patient. Work from the top down. Line up the top corner first and let that stick before finishing the bottom. Squeegee the air bubbles out the way they want to naturally go, but make sure you keep that top corner in the correct spot as this is crucial to a successful application. You will know if you need to spray the distilled water if it’s not sticking, and vice versa if it starts sticking too soon, lather it up with more soapy water. That’s basically it. Take your time and line it up nice. The tint is pre cut perfectly. No need to cut it.

Not even a millimeter off. These are cut precisely to fit my Model 3! The detailed installation video is a must too (this was my first time installing tint of any kind).

The quality of this tint is great! Thick tint, looks like I won’t have to worry about any dust, rocks or bugs fading out my headlights either. 5/5 would definitely recommend!

Second pair I've purchased and the quality is top notch. I can't tell the difference between the 2 year old set I have and the ones I just installed on my other car. These fit perfectly and the video instructions are very helpful with the installation.

Quality is really good, a bit difficult to install it, but trick is to use a heat gun or air dryer. Customer support after a few hours!!!

Fast shipping. Kind customer support with attention to detail.
This product is not easy to install, so if you are not a hands-on person you should consider pay for a professional to do it for you.
Don't listen to people who say this doesn't fit. The product does fit very well. However since the headlight surface is curvy, you should be really patient. Start from top to bottom. Use the squeegee properly to remove air bubbles while then PPF surface is soapy. It took more than 2 hours for me to finish the job. I will see if it really goes over 5 years as it claims.

Its a thick film and difficult to apply but with a bit of patience the results are very well worth it.

Install was not that difficult, the trick is too not over saturate. The medium I found to be too dark. I will be ordering the light one. I also felt the medium blocked a lot of the light and gave it like a purplish tone to my beam.