Door Handles Area PPF | Rivian R2, Clear Paint Protection Film
Protect the places your hands reach every day. This 8 mil clear gloss paint protection film is precut for the Rivian R2 to help guard against scratches from rings, keys and watches while keeping the original finish visible. Choose Door Handles Only for the four handle faces, or Door Handles & Around to protect the surrounding painted areas too.
Pairs well with
Product Features
🛡️ Everyday scratch protection
A clear protective layer helps guard against scuffs and scratches from rings, keys and watches as you open and close the doors. Choose surrounding-area coverage to protect the paint your hand reaches past, too.
🧩 Two coverage options
Door Handles Only covers all four handle faces. Door Handles & Around adds four surrounding paint pieces for broader protection. Both options include a dedicated front-driver handle piece with a cutout.
📐 Precut for Rivian R2
The pattern follows the R2 door handles, with one front-driver design and matching handle pieces for the other three doors. No measuring or trimming on the vehicle is needed.
💎 Clear film. Original finish.
8 mil optically clear gloss TPU keeps the paint visible. Its hydrophobic coating helps water bead, while heat helps reduce fine surface marks in the self-healing surface.
🛠️ A manageable DIY install
Use a wet application to position the film, then squeegee out the water and check the edges. The installation video covers the front-driver cutout, surrounding pieces and rear handles. Allow two days for the film to cure.
📦 Installation essentials included
Your selected coverage comes with a 2 oz slip-solution spray bottle and a 2 × 2 inch rubber squeegee. Add water to the bottle before starting and follow the step-by-step installation video.
More Info / Specifications
Door Handles Area PPF | Rivian R2, Clear Paint Protection Film
Included in the Kit
Materials
Install Time & Difficulty
Fits Models
How to install
FAQs
How long does PPF last?
Paint protection film, if installed properly on a clean surface will last anywhere between 5 to 10 years.
Can I install PPF over ceramic coating or wax?
No, you shouldn't. These chemical treatments will prevent the paint protection film from properly adhering to the paint. If your vehicle is ceramic coated or waxed, do not attempt PPF installation.
Can I use car wash if I have PPF?
Yes, please allow 2-3 days after PPF installation before using a car wash though. This allows the paint protection film to fully cure. Also, please consider using touchless car washes, to avoid the risk of edges picking up by scrubbing the car with a towel.
Can I install PPF in the winter?
Yes! You may need a heat gun or a hair dryer though, as paint protection film gets stiff and unsticky in cold weather. If the surface you are installing on is curvy, use a heat gun or a hair dryer to warm up the film - this will make it soft and sticky. When doing that, remember to spray the PPF on top with soapy solution, to avoid the squeegee dragging against it. Also, if any edges are lifting up at all, heat them up and push them with your fingers to properly seal them.