Cargo Crossbars Wall Mount for Rivian R1T/R1S

$39.95
Quantity:

Product Features

  • 👍 Easily mount your cargo crossbars on a wall, with a simple snap
  • 💪 These mounting frames can hold both cargo crossbars at the same time
  • 📐 Install vertically if you want your crossbars to be in horizontal position, or horizontally if you want your crossbars to be in a vertical position
  • 🖨️ 3D printed with premium super strong ABS, and load tested with both crossbars mounted + 20lbs extra weight
  • 🧰 Easy installation in 10 minutes or less. Drywall screws & drywall anchors provided. All you need is a screwdriver and a level.
  • 🇺🇸 Made in the USA

What's Included

  • 2 mounting plates
  • 12 drywall screws
  • 12 drywall anchors

Installation

Install difficulty: Easy
Install time: ~ 10 min.
Fits:
 Rivian Cargo Crossbars

Installation instructions

1. Decide on a mounting spot and position (vertical or horizontal). Keep in mind you need at least 46" distance between the two plates.

2. Take one of the plates, put it on the wall (without mounting) and use a sharpie or one of the screws to mark its 6 holes on the wall

3. Remove the plate and drill small holes where the markings are. Insert the drywall anchors into these holes until the drywall anchors are flat against the wall.

4. Install the first frame using 6 screws that go into the drywall anchors you just installed.

5. Attach the other frame to one end of a crossbar. Attach the other end of the crossbar onto the installed frame an put a level in the middle/top of the crossbar to establish a perfect position. Have someone help you keep the crossbar leveled while marking the holes of the other mounting plate.

6. Repeat steps 3 and 4 for the other mounting plate.

You may also like

Recently viewed