Windshield & Sunroof Protection Film | Rock Chips, UV & IR Defense for Rivian R1S & R1T
Pairs well with
Product Features
💎 EPU Flexible Film
Unparalleled Clarity. Revolutionary Protection. With a 93% light transmittance — higher than clear glass (88%) and standard TPU film (86%) TWRAPS WPF redefines windshield protection. Crafted from the most advanced 3D-formable EPU film, it overcomes the bulkiness and installation challenges of conventional TPU films.
🛡️ Powerful Shield
This 8mil thick film offers a powerful defense against rock chips and scratches. Its self-healing properties can make scuffs and scratches vanish with just a touch of heat, whether from the sun or manually.
☀️ UV/IR Block
Select UV Block (99% UV block) or UV+IR Block (99% UV / 85% IR) to shield you and your passengers from the primary cause of skin cancer - UV radiation! The IR block blocks out most of the heat infiltrating your cabin, leading to extended range and enhanced comfort.
UV + IR
Here are 5 reasons to choose our UV+IR film:
- ☀️ No Heat Dome: Unlike traditional window tint, this film is installed on the outside. That means that 85% of the heat will be rejected before it even enters your cabin, eliminating the risk of cracked glass due to heat domes caused by traditional sunroof tints that are installed on the inside.
- ❄️ Faster Cooling: In our experiments, a 2025 Gen2 R1S with starting cabin temperature of 120F took only 5 minutes to cool down to 75F when both windshield & sunroof UV+IR films were installed. Without the film it took 20 minutes.
- 🏁 Better Range: Because of the heat rejection, your AC won't need to work as hard, which will translate to slight increase in mileage/range.
- ☺️ Comfy Cabin: You and your passengers will have an overall cooler cabin and comfier experience on those summer adventures.
- 🛡️ Glass Protection: Reduce the risk of glass chips and cracks by adding an 8mil shield between the road and your Rivian.
More Info / Specifications
Windshield & Sunroof Protection Film | Rock Chips, UV & IR Defense for Rivian R1S & R1T
Included in the Kit
Materials
Install Time & Difficulty
Fits Models
UV Block
- 93% VLT (Visible Light Transmission)
- Clear (no color huge)
- 8mil thick flexible EPU
- 99% UV (harmful light) rejection
- 0% IR (heat) rejection
UV + IR Block
- 70% VLT (Visible Light Transmission)
- Blue hue
- 8mil thick flexible EPU
- 99% UV (harmful light) rejection
- 85% IR (heat) rejection
How to install
FAQs
How long does it last?
That depends on many things, but on average a windshield protection film should last about 1-2 years. After that you may notice scratches from the wipers and the film would need to be replaced. When applied on the sunroof it should last at least about 5 years.
With that said, there are a few things you can do to prolong the life of the film:
1. Apply a ceramic coat and re-apply it once a month
2. Avoid operating the wipers without water (i.e don't do dry wipes)
3. Keep your windshield and wipers clean from debris before operating the wipers
Should I ceramic coat it?
We highly recommend that you do. This will improve the film's life.
Can I use car washes?
Yes, please allow 2-3 days after installation before using a car wash though. This allows the windshield protection film to fully cure. Also, please consider using touchless car washes, to avoid the risk of edges picking up by scrubbing the car with a towel.
Does it self heal?
Yes! Notice that self healing happens when the film is hot. In winter months you may want to use a hair dryer or a heat gun to promote self healing.
Will it stop a rock from breaking my window?
The film is 7.6mil thick and providers a first line of defense against smaller rocks. With that said, if you get hit by a larger rock or with higher velocity, the film alone may not be enough to prevent chipping or even breaking. Please look at it that way - you reduce the risk of windshield replacements but you can't eliminate it fully.
Can I apply the TWRAPS WPF over a tinted window?
Yes, the Windshield Protection Film is applied on the outside of the window, while traditional window tint is applied on the inside. Notice though that the UV+IR version has about 70% VLT, which will contribute to further reduction of visibility if you have window tint, so we'd recommend using the standard UV Block version in this case.
Does it interfere with radio signals?
No. The TWRAPS WPF does will not interfere with any radio signals.