Dual Wireless Charging Pad | Rivian R1T/R1S 2021-2026, MagSafe Compatible Charger
Charge two phones side by side in your Rivian R1T (2021–2026) or R1S (2022–2026) with up to 25W per side. This MagSafe-compatible wireless charging pad uses both USB-C ports under the armrest, one for each charging side, leaving neither port available for another device. Built-in magnets help keep compatible phones aligned, and installation requires no tools or adhesives. Actual charging power depends on your phone and the available USB-C power. Not compatible with 2027 Rivian R1T or R1S models.
Pairs well with
Product Features
⚡ Up to 25W per side
Give driver and passenger their own wireless charging spot, each supporting up to 25W with a compatible phone. Actual charging power varies with the phone, case, battery level, temperature, and power available from the vehicle's USB-C ports. Not every phone supports 25W wireless charging.
🔌 Uses both USB-C ports under the armrest
Connect one charging side to each of the two USB-C ports under the armrest. This charger requires both ports, so neither remains available for another device while the charger is connected. Each side has its own USB-C power connection.
🧲 Magnetic alignment for compatible phones
Built-in N52 magnets help keep your phone aligned with the charging puck, while the two-level design accommodates the iPhone's camera bump. Use a compatible MagSafe iPhone or a wireless-charging-capable Android phone with a MagSafe-compatible case. Cases must support wireless charging. AirPods do not charge reliably on this pad.
🛠️ Drop-in fit for Rivian
Designed for the center-console charging area in Rivian R1T (2021–2026) and R1S (2022–2026). Position the pad and connect it to both USB-C ports under the armrest; no tools or adhesives are required. Not compatible with 2027 R1T or R1S models.
⚠️ Gen 2 USB-C compatibility
Some Gen 2 vehicles have USB-C port issues that can trigger the vehicle's electronic fuse and interrupt charging when two phones are connected. Both under-armrest USB-C ports must function correctly for this charger to work as intended.
🇺🇸 Made in the USA with a one-year warranty
Designed and manufactured by TWRAPS in the USA, with a two-layer acrylic body and a satin, fingerprint-resistant finish. Backed by a one-year replacement warranty.
FCC Certified
Our chargers have been independently tested by a 3rd party laboratory and FCC approved as compliant with all US regulatory requirements.
Built for Safety
Overheat Protection
Should the charger exceed safe temperatures, it will shut off on its own.
Fake Object Detection
Whenever a non wireless charging compatible object is placed over our charger, it will automatically detect it and refrain from charging.
Battery Protection
Our charging firmware supports fast charging (PD protocol) at various voltage levels, dynamically switching to provide the precise power your battery requires.
Short Circuit Protection
Should a short circuit occur, the charger will automatically switch off.
More Info / Specifications
Dual Wireless Charging Pad | Rivian R1T/R1S 2021-2026, MagSafe Compatible Charger
Fits Models
Materials
Included in the Kit
How to install
FAQ & Troubleshooting
Does it work with iPhone?
Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back. Our charger is designed on 2 levels so that it can accommodate the iPhone's camera bump.
Does it work with Android?
Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back.
How fast does it charge?
Charging power depends on your selected model and variant. Our 10W/15W models support up to 10W for iPhones or 15W for compatible Android phones. Where a dual model specifies a 20W combined limit, that power is shared between both phones. Our Qi2.2 25W models support up to 25W per compatible phone with a MagSafe-compatible case and the required power source. Check your selected variant’s rating. Actual power depends on your phone, battery level, case and power source.
Will this drain my car's battery?
No! Our pucks are inactive until you place a phone over them.
What kind of case does this work with?
MagSafe case! That's the kind of case that has a magnetic ring on the back - these cases are widely available for most modern phones. Please notice that rugged cases may not be compatible with wireless charging and may not work.
My phone is not staying in place...
If your phone is not staying in place, it means you are not using a MagSafe case. Our pucks utilize a N52 magnetic array which will hold it in place if you have a MagSafe compatible phone case (with a magnetic ring on the back). Please consider getting a new case or at least a stick-on magnetic ring.
Charging is slow...
Check your phone’s charging support and use a MagSafe-compatible case. Follow your model’s installation guide for the correct power connection: some models use vehicle USB, while others use an included 12V adapter. Full 25W charging requires a phone that supports Qi2.2 25W charging. Other supported phones charge at lower power, and charging can slow as the battery fills.
My phone is getting hot...
If your phone is getting excessively hot (to a point where you can consider it overheating) it may be due to not using a MagSafe compatible case. This will result in the phone not being properly positioned over the charging coils and the energy that's supposed to go in your phone is being dissipated as heat.
With that said, if you believe this is not the case, please contact us for further investigation.
