Clear/Stealth PPF Wrap | Full Front or Full Body Paint Protection Film for Tesla Cybertruck

The TWRAPS DIY PPF is an amazing product for those looking to wrap their Cybertruck and save a decent chunk of change in the process. I have never installed PPF before this, so I can't compare the TWRAPS product to any other PPF product. But the TWRAPS product was very well prepared for DIY installation and looks incredible (even with a few mistakes).

Iliya (the owner) is super-responsive to emails and will answer any and all questions you have before, during, and after installation.

I have to admit that the color we chose (Milan Gold) doesn't look quite like I envisioned, even based on seeing the film after receiving it. It is very influenced by the type of light it is in. In most light, like direct sunlight or even led lighting, it looks very yellow gold/tan, and doesn't look metallic even. But in lower light, like twilight, it looks more champagne/rose gold, which is what we were hoping more for. It's not a deal breaker, as it still looks awesome in any lighting...we think. :)

I wouldn't say that installation was the easiest thing I've ever done, but with a couple key pieces of information beforehand, the installation can go smoother and produce a better result.

Here are my takeaways and key tips to anyone thinking about doing diy PPF on the Cybertruck (abbreviated a bit to fit in the review).

- Make sure to read ALL of the pages of instructions supplied with the film. Also, watch the ENTIRE installation video (twice!). I had one issue with one panel due to failing to follow this first tip. I ended up with steel showing on the bottom front corner of the driver's rear door due to not reading the instructions, and not knowing that this particular corner doesn't get edge wrapped like all the other lower door corners.
- Secondly, and potentially more importantly, DO NOT WORRY about any small bubbles that won't EASILY squeegee out to an edge. I can't stress this enough! The majority of my install defects are due to me being anal retentive and trying to remove EVERY bubble, no matter how difficult they were to move to an edge. Even after knowing that bubbles from the hood were disappearing after a couple hours, I kept trying to remove all of them. Fight that urge if you have it!! Because even the largest bubble I had completely disappeared after a few days with a decent amount of time in the sun. And more importantly, moving a bubble, if the film is quite dry underneath, will damage the film at the adhesive layer and show forever.
- To help with reducing how many small, difficult-to-move bubbles you have, make sure to use at least a 1:15 soap to water ratio in your slip solution. I stupidly started lower than that, and it definitely makes it harder to get the water and bubbles out from under the film, as the film starts to attach very quickly. I believe my installation was more difficult due to me being in Texas in August, and it probably being 95-100 degrees in the garage. The water under the film was drying/evaporating at a very rapid rate. It was difficult to work fast enough on the initial tack points and surfaces before the rest of the panel was too dry to squeegee out -- even very large bubbles. So, it required partially pulling the film back off and adding more slip solution underneath.
- Do not accidentally try to squeegee with the top surface of the film when it is dry. This can unfortunately be easy to do with the rubber squeegee as it pretty much removes all of the surface water with a single pass. So, if you are trying to do multiple passes, the film will most likely be dry where you just squeegeed. And, if you put much force and speed into it, you can catch the film with the squeegee and wrinkle it. Yes, I did this at least once and will not heal and show forever. :(
- Take your time on the edge folding and probably put it off until the next day. The main issue I had with the edge wrapping was causing wrinkles/ripples after each place where I tucked it in. I think the only way around this is try to partially wrap the edge the entire length of that panel, and then go back to fully tuck it all the way in. The panels this affects the most are the cantrails (on the window edge) and the frunk. These panels have very tight spaces. Use the sharp-edged tool provided with the film for this.
- IF you do need to peel the film back up, BE CAREFUL! It IS possible to tear the film. Ask me how I know. :(
- While installing the film is largely a one-person job, it is advised to have someone help to peel the film from the backing. It is one of the hardest parts of the whole process, surprisingly. Again, be careful not to tear the film here...no, I didn't tear it at this step. :)

I think that's about it. After the film has cured, even with all the defects I produced, our PPF really looks amazing! Just take your time (except when squeegeeing, where you need to work quickly) and you'll do just fine.

This was my first wrap and I decided to DIY it. Brave, right :-) The TWarp team however, made it such a great experience all round. Thanks! I recommend watching the nearly 2 hour long video demonstration. I learned a lot watching it. In my case I had playing on my iPad in the garage as I wrapped away :) Of note also is the promptness and exactness of the SMS support I got throughout the install process.

So glad I chose Twraps for this Cybertruck wrap using Satin Racing Blue PPF. Looks so much better wrapped and easier to install than I thought it would be. Customer service is amazing and can’t thank them enough. I had zero issues with the install and all cuts of the PPF were perfect and fit great. Thank you for making this wrap a DIYer ‘s dream!

IIilya is great - the best support I have ever received from an online purchase! I contacted him a few times in the process and he immediately responded each time. The product is amazing! It was my first time and it turned out great. My advice would be to make sure you let the edge dry before you do the edge wrap. Thanks again IIilya!

I'm a tough reviewer. I couldn't be happier. I started with Matte Shark Grey and the support I received was unmatched by any other product I have ever purchased. I never wrapped a vehicle before and Iliya was basically at my beck and call. He helped me with some issues i was having and everything turned out great. 3 weeks later I was rear ended in a parking lot. I guess it's time for a new color! Iliya gave me directions on how to remove the old wrap, what tools to buy, and 2 dayS after I got my Truck back from the shop it was a new color, Flowing Black Charming Red.

I can't speak to the other brands as I haven't dealt with them, but my experience with Twraps has been nothing short of amazing. If you're looking for quality wraps under a budget, I think you can't go wrong here. The owner, Iliya, guided my every step of the way as it was my first time installing a PPF wrap. He spent countless hours trying to ensure that I was taken care of.

The color I decided to go with was Purple Phantom Blue as I wanted to play it safe seeing that he had a demo bicep of it on YT. I think the key to installing it yourself is being patient. Allow yourself plenty of time to finish and don't be afraid to take breaks when you are tired. You don't have to finish in a day because let's admit it, we are not professionals. Go slow and preferably have a person help you. Take your time, and if all else fail, get in touch with Iliya and he will help you the best way he can. You got this!

I would highly recommend this PPF kit to anyone. I have never installed vinyl or PPF before. I watched the TWraps YouTube instructional video and went right out and completed it, in 8 hours! It was a hard day, I’m old, I would split it up over two days if I ever did it again. Lliya, called me directly and texted when I had questions, he was super helpful!

Cant say enough about how great it was working with twraps. The kit was super easy to install because it was cut perfect and I didn't have to disassemble a thing. Extremely happy with the results and had a ton of purchasing support and a ton of install support from twraps. Highly recommend this kit!

Best customer service I have had in years. This wrap is cut so well it fits perfect. You have to be patient but you can make it look professional. This was the first wrap I ever did. I will be back as a customer. Matte Mysterious Green.

I purchased the diy full ppf wrap in satin black magic purple.
The material itself is amazing. Super easy to work with. Couldn’t have asked for an easier install.
Took 12hrs with a helper which I think was pretty good for first time.
Customer service has been exceptional! I even needed extra pieces due to cantail recall and tailgate replacements.
They responded and shipped right away and I only had to pay shipping for the extra pieces.
Extremely happy overall 5 stars.