2022 California HOV Stickers PPF + Tint

Product Features

• 🛡 Protect your paint from the nasty adhesive of the HOV stickers. The bottom layer PPF allows you to install the HOV sticker on the PPF, and easily remove it by removing the PPF and keeping your paint spotless.
•  🏁 The tinted version adds an extra layer on top of the HOV sticker, which reduces its brightness (let's face it, that yellow is an acquired taste)
• 💪 Install in under 5 minutes. Install kit included.
• 💎 Precise digital cutout
• 🇺🇸 Made in the USA

What's Included

• NOTICE: Actual HOV stickers are NOT included, you should request those from the DMV
• 4 x 2022 HOV Sticker cutouts - 2 big and 2 small - if you order the tinted version you get double that - 4 clear pieces and 4 tinted pieces, 8 in total.
  
• Squeegee
• Spray bottle, pre-filled with soap
• Installation instructions + video

Installation

1. Fill the spray bottle with water
   Fill up the provided spray bottle with water. It already includes a drop of soap in it. To open the flat spray bottle, just pull the middle tab up (the one that has a spray hole). If you find it hard to pull up, use pliers.
   

2. Clean
   Spray the surface where you will be installing the HOV sticker and clean it.
   

3. Spray
   Once cleaned, spray the surface again. Then spray your fingers, spray the PPF/tint on top, then peel off the PPF/tint and spray its adhesive side.
   

4. Apply & align
   Apply the wet PPF/tint on the surface.
   

5. Squeegee out the water
   Use the provided squeegee to remove the water from under the PPF. Make sure you use the soft side of the squeegee to prevent scratching the PPF. Keep using the squeegee until there are no bubbles. You may need to re-position the PPF/tint as you remove the water, as it's possible it will slide a bit during this process.
   

6. Tint
   If you purchased the tinted option, please follow the same steps to install the tint layer on top of the HOV sticker, after installing the clear PPF first and the HOV sticker on top of it.
   

7. Let it cure
   Wet installations require minimum of 24 hours to cure. Please avoid car washes for 1-2 days after applying the PPF/tint.