MagSafe Compatible Dual Wireless Charger | Lucid Air
Built for the Lucid Air 2021-2026, this dual Qi2 charger powers two phones at once at up to 25W each, including iPhone 17 Pro and iPhone 17 Pro Max. It drops into the center console and the lid still closes over it. A two-level design clears camera bumps, magnets hold iPhones and cases compatible with MagSafe, and the included USB-C splitter runs both pucks from a single port so your other one stays free.
Pairs well with
Product Features
⚡️ Dual Qi2 Charging
Two integrated pucks each deliver up to 25W, built for the Qi2 capability of iPhone 17 Pro and iPhone 17 Pro Max.
🚗 Center Console Fit
Designed for the Lucid Air 2021-2026, it drops into the center console and the lid still closes over it. Solid 1.5lbs build.
🔌 One Port, Both Pucks
An included USB-C splitter runs both pucks from a single console port, leaving your other USB-C port free to use.
📸 Camera-Bump Clearance
A two-level design clears the protruding cameras on iPhone 17 Pro and Pro Max so phones rest flat against the pucks.
🧲 Strong Magnetic Hold
Each puck automatically aligns with and holds iPhones and cases compatible with MagSafe on curves and rough roads.
🏆 1 year warranty
Worry free 1 year warranty - if the charger stops working for any reason, we'll replace it for free.
FCC Certified
Our chargers have been independently tested by a 3rd party laboratory and FCC approved as compliant with all US regulatory requirements.
Built for Safety
Overheat Protection
Should the charger exceed safe temperatures, it will shut off on its own.
Fake Object Detection
Whenever a non wireless charging compatible object is placed over our charger, it will automatically detect it and refrain from charging.
Battery Protection
Our charging firmware supports fast charging (PD protocol) at various voltage levels, dynamically switching to provide the precise power your battery requires.
Short Circuit Protection
Should a short circuit occur, the charger will automatically switch off.
More Info / Specifications
MagSafe Compatible Dual Wireless Charger | Lucid Air
Fits Models
Materials
Included in the Kit
How to install
FAQ & Troubleshooting
Does it work with iPhone?
Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back. Our charger is designed on 2 levels so that it can accommodate the iPhone's camera bump.
Does it work with Android?
Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back.
How fast does it charge?
Each puck supports 15W of peak power. Our dual pucks support 20W combined. Notice that charging speed in most cases will be slower due to various restrictions outside of our control - such as how powerful your USB port is, what's your battery health etc. Additionally it's worth noting that iOS throttles non-Apple pucks to 10W.
Will this drain my car's battery?
No! Our pucks are inactive until you place a phone over them.
What kind of case does this work with?
MagSafe case! That's the kind of case that has a magnetic ring on the back - these cases are widely available for most modern phones. Please notice that rugged cases may not be compatible with wireless charging and may not work.
My phone is not staying in place...
If your phone is not staying in place, it means you are not using a MagSafe case. Our pucks utilize a N52 magnetic array which will hold it in place if you have a MagSafe compatible phone case (with a magnetic ring on the back). Please consider getting a new case or at least a stick-on magnetic ring.
Charging is slow...
Our pucks are capable of fast charging. With that said, there are several constraining factors outside of our control. Here are a few to keep in mind:
- Wireless charging is slower than charging with a cord
- If your car uses a USB-A port, that will max out at around 6.5W, it's a restriction with the USB-A standard.
- iPhones will throttle non-Apple chargers to 10W.
- Your phone may not be allowing faster charging due to full battery or other battery related optimizations or battery health issues.
- If you are not using a MagSafe case, your phone will almost never be properly positioned. That will result in overheating and loss of charging potential in the form of heat. Please use a MagSafe case.
My phone is getting hot...
If your phone is getting excessively hot (to a point where you can consider it overheating) it may be due to not using a MagSafe compatible case. This will result in the phone not being properly positioned over the charging coils and the energy that's supposed to go in your phone is being dissipated as heat.
With that said, if you believe this is not the case, please contact us for further investigation.
