Fast & free US mainland shipping $50+ / 30 days returns

Product Features

⚡️ Reliable charging

Enjoy fast and efficient charging for your iPhone or Android with a compatible MagSafe case!

🔋 Clutter free

With charging power of up to 10W for iPhones and 15W for compatible Androids, our charger eliminates the need for additional cables or adapters.

🧲 MagSafe compatibility

With strong built-in magnets and a design that accommodates the iPhone's camera bump, the TWRAPS charger keeps your device securely in place while wirelessly charging, even on bumpy roads.

💠 Solid and beautiful design

Our wireless charger boasts a sleek two layer construction, blending seamlessly with your car's interior.

🇺🇸 Made in the USA

From design to manufacturing our charger is entirely made in the USA.

🏆 1 year warranty

Worry free 1 year warranty - if the charger stops working for any reason, we'll replace it for free.

FCC Certified

Our chargers have been independently tested by a 3rd party laboratory and FCC approved as compliant with all US regulatory requirements.

See on FCC's website

Built for Safety

Overheat Protection

Should the charger exceed safe temperatures, it will shut off on its own.

Fake Object Detection

Whenever a non wireless charging compatible object is placed over our charger, it will automatically detect it and refrain from charging.

Battery Protection

Our charging firmware supports fast charging (PD protocol) at various voltage levels, dynamically switching to provide the precise power your battery requires.

Short Circuit Protection

Should a short circuit occur, the charger will automatically switch off.

More Info / Specifications

MagSafe Compatible Wireless Charger | F150 Lightning XLT & Pro

Fits Models

  • Ford F150 Lightning - XLT and Pro

Materials

  • The main body is constructed from two 6mm thick high-density acrylic sheets, each featuring a satin, fingerprint-resistant coating on both sides.
  • Our pucks are built with strong N52 magnetic arrays.

Included in the Kit

  • MagSafe compatible wireless charger

How to install

FAQ & Troubleshooting

Does it work with iPhone?

Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back. Our charger is designed on 2 levels so that it can accommodate the iPhone's camera bump.

Does it work with Android?

Yes, if you have a MagSafe case. That's the kind of case that has a magnetic ring on the back.

How fast does it charge?

Each puck supports 15W of peak power. Our dual pucks support 20W combined. Notice that charging speed in most cases will be slower due to various restrictions outside of our control - such as how powerful your USB port is, what's your battery health etc. Additionally it's worth noting that iOS throttles non-Apple pucks to 10W.

Will this drain my car's battery?

No! Our pucks are inactive until you place a phone over them.

What kind of case does this work with?

MagSafe case! That's the kind of case that has a magnetic ring on the back - these cases are widely available for most modern phones. Please notice that rugged cases may not be compatible with wireless charging and may not work.

My phone is not staying in place...

If your phone is not staying in place, it means you are not using a MagSafe case. Our pucks utilize a N52 magnetic array which will hold it in place if you have a MagSafe compatible phone case (with a magnetic ring on the back). Please consider getting a new case or at least a stick-on magnetic ring.

Charging is slow...

Our pucks are capable of fast charging. With that said, there are several constraining factors outside of our control. Here are a few to keep in mind:

  • Wireless charging is slower than charging with a cord
  • If your car uses a USB-A port, that will max out at around 6.5W, it's a restriction with the USB-A standard.
  • iPhones will throttle non-Apple chargers to 10W.
  • Your phone may not be allowing faster charging due to full battery or other battery related optimizations or battery health issues.
  • If you are not using a MagSafe case, your phone will almost never be properly positioned. That will result in overheating and loss of charging potential in the form of heat. Please use a MagSafe case.
My phone is getting hot...

If your phone is getting excessively hot (to a point where you can consider it overheating) it may be due to not using a MagSafe compatible case. This will result in the phone not being properly positioned over the charging coils and the energy that's supposed to go in your phone is being dissipated as heat.

With that said, if you believe this is not the case, please contact us for further investigation.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Cordell S. (Wenatchee, WA, US)
XLT Phone Charger

Excellent fit, suitable quality materials, and good customer service. This product solved a problem.

E
Emmett F. (Huntsville, AL, US)
Just what I needed

Fits perfectly in the F150 XLT. Took a few times to get tge hang on connecting to the magnet.